| Dirt Late Model Racing Association |
1/8 Open Nitro Late Model Rules:
Section 1:
Chassis:
1-1 Must be 1/8 production based 4 WD buggy drive
train.(Losi,Ofna,X-Ray and so on)
1-2 No offsetting a-arms or narrowing of a-arms
1-3 Must have dog bone center drive train, no on-road
drive trains.
1-4 No one off chassis. Example: If you have a home
made chassis you must make one for anyone who wants
one at a reasonable price or let anyone copy it. As a
manufacturer or a person who would make one for
someone you don't have to let them copy it.
1-5 Wheel base: 12 5/8" to 13"
1-6 Width: 13" max. - 11 1/4" min.
1-7 Any and all parts must be flush or in side the tread
width. 1/8 tolerance.
1-8 All chassis and tires must remain inside the body.
1-9 No metal or carbon fiber front bumpers.
1-10 Must have foam on the front bumper.
Section 2:
Motors:
2-1 Any .28 or less
2-2 Modding is legal.
Section 3:
Bodies:
3-1 Molded one- piece bodies only.
3-2 No additional wings, flaps, spoilers, wickers, vents or
doohickeys will be allowed except what's in sections 4,5
&9.
3-3 A hole or holes for motor cooling
3-4 Decking is allowed
3-5 There will be no metal body parts of any kind.
3-6 All bodies must be approved.
Approved Body list:
C&M-2009 "ATOMIC"
Losi# losa8096
Ofna# 31143
RJ Speed# 1015 & 1030
A+ one piece
2009 Stalker
2010 Stalker SS
2010 Onstat LM
Section 4:
Side Dam specs:
4-1 Running a Side Dam is the tracks choice.
4-2 Side dam front leading edge must be at least 4" from
center of left front spindle with the wheels straight.
4-3 Side dam can be 5" tall from deck at it's highest point,
and cannot extend past rear spoiler.
4-4 Must have two tethers at least 8" apart.
4-5 Side dam must be on left side!
Section 5:
Rear Spoiler Specs:
5-1 Rear spoiler can only be as wide as the body at the
rear quarter panels.
5-2 Rear spoiler 3" max from deck.
5-3 The end caps must be a triangle shape.(See template)
You may have one fin on the spoiler and two side caps.
The third fin must also be the same dimension as side cap.
It can be located anywhere on the spoiler between the
two side caps. The fin must be in line with the side caps
on the front leading edge.
Section 6:
Wheel & Tire Specs:
6-1 Tracks choice on which tires are legal (Foam or
Rubber) from approved tire list!
6-2 All wheels must be 17mm buggy based.
Foam tire specs:
6-3 Max tire diameter- 106mm Max tire width- 46mm
Spec rubber tires:
6-4 There will not be any grooving or sipping of the
rubber tires.
6-5 All rubber tires are pre-mount and must remain stock
out of the box.
6-6 Traction compounds are legal.
Approved list:
Ofna Tire Part # 86505 this is the pre-mount tire.
Losi Tire Part # LOSA17758
Losi Tire Part # Losa17757-450
GRP belted rally Part # GMW01E
Section 7:
Weight:
7-1 8-1/2 lb. At any time
1/8 Spec Nitro Late Model Rules:
Section 1,3,5,6 & 7 are the same for spec.
Section 8:
Spec Motors:
8-1 Must be Box stock,no modification at all!
8-2 Different glow plug heat ranges can be used.
8-3 No turbo plugs
Approved Motor list:
RB S3
OS VG
Nova BF .21
Losi 350 3 port part # losr2300-450
Section 9:
Side Dam specs:
9-1 Running a Side Dam is the tracks choice.
9-2 Side dam front leading edge must be at least 4" from
center of left front spindle with the wheels straight.
9-3 Side dam can be 3" tall from deck at it's highest point,
and cannot extend past rear spoiler.
9-4 Must have two tethers at least 8" apart.
9-5 Side dam must be on left side!
1/8 Electric Late Model
Section 1,3,4,5,6 & 7 are the same for Electric.
Section10:
Motors:
10-1 Any 2250(KV) or less brushless.
Section 11:
Batteries:
11-1 Any 14.8v- 5,000(mAh) 4s- 40c or less
11-2 Series- Any two 7.4v-5,000(mAh) 2s-40c or less
Section:12
Speed Controller:
12-1 Any
Section 13:
Approval process:
13-1 Motor, tire and body approval will be done on a
submit with a test and trial period by the DLMRA. Any new
product will have a 60 day period after approval before it
will be made legal to run.
13-2 All products for the 2010 season must be submitted
by 3-31-10.
13-3 Anyone with a product to submit e-mail me at
mikeo@ottsspeedshop.com
Section 14:
Tracks:
14-1 The track has final say on rules enforcement!
Section 15:
15-1 The DLMRA is not responsible for any actions by
tracks or racers!
Section 1:
Chassis:
1-1 Must be 1/8 production based 4 WD buggy drive
train.(Losi,Ofna,X-Ray and so on)
1-2 No offsetting a-arms or narrowing of a-arms
1-3 Must have dog bone center drive train, no on-road
drive trains.
1-4 No one off chassis. Example: If you have a home
made chassis you must make one for anyone who wants
one at a reasonable price or let anyone copy it. As a
manufacturer or a person who would make one for
someone you don't have to let them copy it.
1-5 Wheel base: 12 5/8" to 13"
1-6 Width: 13" max. - 11 1/4" min.
1-7 Any and all parts must be flush or in side the tread
width. 1/8 tolerance.
1-8 All chassis and tires must remain inside the body.
1-9 No metal or carbon fiber front bumpers.
1-10 Must have foam on the front bumper.
Section 2:
Motors:
2-1 Any .28 or less
2-2 Modding is legal.
Section 3:
Bodies:
3-1 Molded one- piece bodies only.
3-2 No additional wings, flaps, spoilers, wickers, vents or
doohickeys will be allowed except what's in sections 4,5
&9.
3-3 A hole or holes for motor cooling
3-4 Decking is allowed
3-5 There will be no metal body parts of any kind.
3-6 All bodies must be approved.
Approved Body list:
C&M-2009 "ATOMIC"
Losi# losa8096
Ofna# 31143
RJ Speed# 1015 & 1030
A+ one piece
2009 Stalker
2010 Stalker SS
2010 Onstat LM
Section 4:
Side Dam specs:
4-1 Running a Side Dam is the tracks choice.
4-2 Side dam front leading edge must be at least 4" from
center of left front spindle with the wheels straight.
4-3 Side dam can be 5" tall from deck at it's highest point,
and cannot extend past rear spoiler.
4-4 Must have two tethers at least 8" apart.
4-5 Side dam must be on left side!
Section 5:
Rear Spoiler Specs:
5-1 Rear spoiler can only be as wide as the body at the
rear quarter panels.
5-2 Rear spoiler 3" max from deck.
5-3 The end caps must be a triangle shape.(See template)
You may have one fin on the spoiler and two side caps.
The third fin must also be the same dimension as side cap.
It can be located anywhere on the spoiler between the
two side caps. The fin must be in line with the side caps
on the front leading edge.
Section 6:
Wheel & Tire Specs:
6-1 Tracks choice on which tires are legal (Foam or
Rubber) from approved tire list!
6-2 All wheels must be 17mm buggy based.
Foam tire specs:
6-3 Max tire diameter- 106mm Max tire width- 46mm
Spec rubber tires:
6-4 There will not be any grooving or sipping of the
rubber tires.
6-5 All rubber tires are pre-mount and must remain stock
out of the box.
6-6 Traction compounds are legal.
Approved list:
Ofna Tire Part # 86505 this is the pre-mount tire.
Losi Tire Part # LOSA17758
Losi Tire Part # Losa17757-450
GRP belted rally Part # GMW01E
Section 7:
Weight:
7-1 8-1/2 lb. At any time
1/8 Spec Nitro Late Model Rules:
Section 1,3,5,6 & 7 are the same for spec.
Section 8:
Spec Motors:
8-1 Must be Box stock,no modification at all!
8-2 Different glow plug heat ranges can be used.
8-3 No turbo plugs
Approved Motor list:
RB S3
OS VG
Nova BF .21
Losi 350 3 port part # losr2300-450
Section 9:
Side Dam specs:
9-1 Running a Side Dam is the tracks choice.
9-2 Side dam front leading edge must be at least 4" from
center of left front spindle with the wheels straight.
9-3 Side dam can be 3" tall from deck at it's highest point,
and cannot extend past rear spoiler.
9-4 Must have two tethers at least 8" apart.
9-5 Side dam must be on left side!
1/8 Electric Late Model
Section 1,3,4,5,6 & 7 are the same for Electric.
Section10:
Motors:
10-1 Any 2250(KV) or less brushless.
Section 11:
Batteries:
11-1 Any 14.8v- 5,000(mAh) 4s- 40c or less
11-2 Series- Any two 7.4v-5,000(mAh) 2s-40c or less
Section:12
Speed Controller:
12-1 Any
Section 13:
Approval process:
13-1 Motor, tire and body approval will be done on a
submit with a test and trial period by the DLMRA. Any new
product will have a 60 day period after approval before it
will be made legal to run.
13-2 All products for the 2010 season must be submitted
by 3-31-10.
13-3 Anyone with a product to submit e-mail me at
mikeo@ottsspeedshop.com
Section 14:
Tracks:
14-1 The track has final say on rules enforcement!
Section 15:
15-1 The DLMRA is not responsible for any actions by
tracks or racers!
| 2010 DLMRA Series Best of the West Series Outlaw Nitro Series 2010 DLMRA Tracks www.jcp-rc.com Edinburgh, IN Proving Grounds 2 Sumter, SC Crazy Boys Raceway 14923 st r 104 Ashville,Oh. 43103 Brentwood Racing Club 2560 Concord Ave Brentwood Ca. Redding, California Nitro Barn Cherryville, NC Family R/C Raceway Mosheim, TN Outback Speedway Greeneville, TN Music City Raceway Nashville, TN CCRC Speedway Clear Creek, WV Parkersburg Raceway Parkersburg, WV Little Eldora Akron,Ohio JRC Speedway PA VRP Hobbies Brooks,GA. Thanks to all the tracks who are choosing to run the DLMRA rules package! We have a few new tracks in Florida joining the DLMRA for the 2011 season. Tracks will be named soon. |
| DLMRA 2011 National Championship Race! Click here for more info! |
2010 1/8 Dirt Late Model Rules |
| New classes coming for the 2011 race season! |