| Dirt Late Model Racing Association |
10.5 1/10 Two wheel drive Electric Late Model Rules! All cars must have 4-wheel independent suspension. No straight axle cars allowed, single speed transmissions only. Wheelbase: 9.500” min, 11.500" max Maximum width: 10.000” (foam tires) and 10.250" (rubber tires) Radio use is limited to 2 channels only, no wings adjustable from radio, no front brakes allowed. Foam Tires: Max wheel diameter: 2.0” Max front tire and wheel width: 1.1” Max rear tire and wheel width: 1.5” Buggy Tires: Max wheel diameter: 2.2” front and rear Max wheel width: 1.750” rear, 1.000” front Max tire width: 1.850” rear, 1.250” front Rear Spoiler: 1 1/2" from body deck including any wicker bills. Rear spoiler can only be as wide as the body at the rear quarter panels. The end caps must be a triangle shape.(see template) You may have one fin on the spoiler and two side caps. The third fin must also be the same dimension as side cap. It can be located anywhere on the spoiler between the two side caps. The fin must be in line with the side caps on the front leading edge. Side Dam specs: Side dam front leading edge must be at least 4" from center of left front spindle with the wheels straight. Side dam can be 4" tall from deck at it's highest point, and cannot extend past rear spoiler. Max wicker 1/2" Must have two tethers at least 8" apart. Side dam must be on left side! Approved Bodies: Custom Works #9012 Eldora Late Model Custom Works #9014 Paducah Late Model Custom Works #9015 Springfield Late Model Custom Works #9070 Keystone Late Model McAllister #207 Tulsa Late Model McAllister #250 Vegas Late Model McAllister #252 Winchester Late Model McAllsiter #237 Bakersfield Late Model BMS Racing #P103 Shadow Factory Works #7353 Rocket Late Model Factory Works #7357 Concord Late Model C&M Bodies #2010 Volunteer Late Model C&M Bodies #2010-003 Nightmare Late Model C&M Bodies #2011-001 Nightmare HD Late Model Stalker Bodies #009 Sniper 9 Late Model Stalker Bodies #010 Sniper Late Model All motor systems must meet ROAR Brushless specification. Sensored or sensor less speed controls are allowed. Motors: Any roar legal 10.5 motor Batteries: Any 7.4V LiPo ROAR legal battery, batteries must use a quick release hobby grade connector for connection to the ESC. 8.44V max charge! Minimum weight is 50 oz. |
 |
 |
 |
 |
 |
 |
 |
 |
| All tracks and series please be aware there some bodies that are very close to the bodies on the approved list but have not been approved! They are not legal! |