Dirt Late Model Racing Association

1/8 Super Late Models

Section 1:
Chassis:
1-1 Must be 1/8 production based 4 WD buggy drive train.(Losi,Ofna,X-Ray and so on)
1-2 No offsetting a-arms or narrowing of a-arms
1-3 Must have dog bone center drive train, no on-road jack-shaft type drive trains.
1-4 150 cc fuel tank & 12" max inlet fuel line
1-5 Wheel base: 12 5/8" to 13"
1-6 Width: 13" max. - 11 1/4" min.
1-7 Any and all parts must be flush or in side the tread width. 1/8 tolerance.
1-8 All chassis and tires must remain inside the body.
1-9 No metal or carbon fiber front bumpers.
1-10 Must have foam on the front bumper.


Section 2:
Motors:
2-1 Must be Box stock,no modification at all!
2-2 Different glow plug heat ranges can be used.
2-3 No turbo plugs
2-4 No adding or removing of head shims!
2-5 Carb restrictors can be changed
2-6 All Nitro engines must have a carb return device!

Approved Motor list:
Fusion X3 .21
OS 3 port VG .21
Nova 3 port BF .21
Novarossi N21B 09 .21-New version of the BF- Same specs
Losi 350 3 port .21 part # losr2300-450


Section 3:
Bodies:
3-1 Molded one- piece bodies only.
3-2 No additional wings, flaps, spoilers, wickers, vents or doohickeys will be allowed  except what's in
sections 4 & 5
3-3 A hole or holes for motor cooling
3-4 Decking is allowed
3-5 There will be no metal body parts of any kind.
3-6 All bodies must be approved.

Approved Body list:

C&M 2011 "Assassin"
C&M-2009 "Atomic"
Losi# losa8096
Ofna# OFN34046
RJ Speed# 1015 & 1030
A+ one piece
2009 Stalker
2010 Stalker SS
2010 Onstat LM



Section 4:
Side Dam specs:
4-1 Running a Side Dam is the tracks choice.
4-2 Side dam front leading edge must be at least 4" from center of left front spindle with the wheels
straight.
4-3 Side dam can be max 5" tall from deck at it's highest point, and cannot extend past rear spoiler.
4-4 Must have two tethers at least 8" apart.
4-5 Side dam must be on left side!
4-6 Track or Series can mandate spoiler/side dam height

Section 5:
Rear Spoiler Specs:
5-1 Rear spoiler can only be as wide as the body at the rear quarter panels.
5-2 Rear spoiler 3" max from deck.
5-3 The end caps must be a triangle shape.(See template)
You may have one fin on the spoiler and two side caps.
The third fin must also be the same dimension as side cap.
It can be located anywhere on the spoiler between the two side caps. The fin must be in line with the side
caps on the front leading edge.

Section 6:
Wheel & Tire Specs:
6-1 Tracks choice on which tires are legal (Foam or Rubber) from approved tire list!

6-2 All wheels must be 17mm buggy based.

Foam tire specs:
6-3 Max tire diameter- 106mm    Max tire width- 46mm

Spec rubber tires:
6-4 There will not be any grooving or sipping of the rubber tires.
6-5 All rubber tires are pre-mount and must remain stock out of the box.
6-6 Traction compounds are legal.

Approved Tire list:
Ofna Tire Part # OFN86509
Losi Tire Part # Losa17757-450


Section 7:
Weight:
7-1 8-1/2 lb. At any time


Section 8:
Tracks:
8-1 The track has final say on rules enforcement!

Section 9:
9-1 The DLMRA is not responsible for any actions by tracks or racers!
All tracks and series
very close to the
bodies on the  
approved list but have
not been approved!

They are not legal!